產品目錄
- 德國Lampert
- BND自研
- 德國FEMTO放大器
- 德國GTE
- Pacific Lasertec...
- 數據采集AA LAB SYSTE...
- 流量測量AA LAB SYSTE...
- 光纖鏈路AA LAB SYSTE...
- AA Lab Systems放大...
- HGE
- 博納德試驗指針?shù)N
- 插頭插座類檢測設備
- 燈頭燈座類檢測設備
- 標準地板防滑系列
- 進口手持型測力計
- 意大利Gabbrielli
- 英國MUNRO風速風向表
- 美國DL放大器
- 陶瓷扭轉粘度計
- 高壓電源放大器
- DEI脈沖發生器
- 瑞士Zurich Instrum...
- 冷凍負載試驗包
- 博納德試驗機設備
- 體育檢測儀器
- 美國ED&D試驗指
- 德國PTL試驗機設備
- 德國PTL試驗指針?shù)N
- 光纖光譜儀
- 微型稱重傳感器
- 光學斬波器
- 高集數據采集卡
- 美國SRS放大器
- 德國WAZAU系列
- MONROE靜電測試儀
- 其他
產品詳情
簡單介紹：
PTL軟線柔性試驗機通過來回彎折來測試軟電線和電纜的機械壽命。
PTL軟線柔性試驗機機根據IEC60065/2005-12&16.3b)表19,IEC60227-2/2003-04&3.1.2表1圖1,IEC60245-2/1998-04 &3.1.2表1圖1,VDE0472部分603/1989-07&4.8and&4.12圖5等相關標準
詳情介紹：
PTL軟線柔性試驗機
產品名稱：PTL軟線柔性試驗機
產品名稱：PTL軟線柔性試驗機
產品型號：F43.11
產品用途：通過來回彎折來測試軟電線和電纜的機械壽命。
符合標準：根據IEC60065/2005-12&16.3b)表19,
IEC60227-2/2003-04&3.1.2表1圖1,
IEC60245-2/1998-04 &3.1.2表1圖1,
VDE0472部分603/1989-07&4.8and&4.12圖5等相關標準
Standard out fit
1 carrier, with recirculating-ball bearing bushes running be-low the table-board on two cylindrical guide ways, with mounted travelling boom,
1 geared motor with chain and connecting rod to drive the carrier with a speed
0.33 m/s ± 5%,
2 supports for the side pulleys,with grooves for the adjust-ment of the pulleys,
1 set of bolts nuts and ball bearings for fastening the pulleys,
1 set of loading weights, de-tails see F 43/3
1 set of restraining clamps as stops to limit the travel of the sample,
1 set of terminals for connec-tion of the samples,
1 base, with one front and two side doors, with splited table-board, with shelf for accessories,
1 protecting hood with panes of polycarbonate glass, disburdened by gas springs, with elec-tric drive to open and to close,
3 door contact switches for the side doors and for the protecting hood,
1 electrical current load unit, details see F 43/3,
1 electrical switching and control unit with main switch, lockable switch EMERGENCY-OFF,preset counter as well as push buttons I and O.
Design: Steel construction, papyrus-white structure varnished with stone grey coloured high-lights, smaller steel parts burnished or nickel-plated, cylindrical guide ways hardened and ground,for operation at 3 x 400 V 50 Hz or 60 Hz
Article No.: F 43.11
